MDIN

Flush installation LED aluminum extrusion

MDIN LED extrusion was designed to be placed within a drywall application, with its ‘wings’ then covered with tape and mud so it has a seamless look. Once inside the drywall, there’s a very small nominal ¹ ⁄ ₁₀” reveal showing the light so it is nearly flush. MDIN stainless steel mounting clips were engineered to tightly hug the extrusion. Offered in a satin finish and with a diffused lens, for LED free direct view applications and available in lengths up to 98.43”.

MDIN is UL listed when assembled with Q-Tran's LED strips. NRTL listed for installation in storage areas with clothing. NEC Field 410.2 and 410.6 when MDIN is assembled as a fixture at the Q-Tran facility, with a 4.0-watt/foot strip or less. It can be recessed mounted with adhesive only.

Spec Sheet Master Ordering Guide Set

Find a Rep Contact Us

More About MDIN

Technical Information Compatibility All Downloads Videos Related Products

Technical Information

Finish	Satin
Mounting	Stainless Steel
Lens	Diffused
Type	Single (1), Not Installed
Classifications	UL, Closet Rated NEC 410.2 & 410.16, RoHS, Recessable

Compatibility

	Static White					SD-SW				Dynamic White				Warm Dim				Static Color				RGB				RGBW
	1.5 – 6.0 W/ft				IA5.0W/ft	2.0, 4.0, 6.0 W/ft				6.0 W/ft				6.0 W/ft				5.0 W/ft				6.0 W/ft				6.0 W/ft
EXTRUSIONS	DRY	DMP	WET	ENC	DRY	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC
SLIM
WIDE
ROND
TORQ
TRE3
ARKA
TELA
VEVE
FLUR
EMBD
LATO
LALO
TALO
MDIN

= Compatible

= NOT Compatible with 6.0 strip

= NOT compatible

= Wet rated but with no lens

	Static White - HE																Dynamic White - HE												RGBW - HE
	1.5 W/ft				3.0 W/ft				6.0 W/ft				9.0 W/ft				3.0 W/ft				5.0 W/ft				8.0 W/ft				4.0W/ft				8.0W/ft
EXTRUSIONS	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC	DRY	DMP	WET	ENC
SLIM
WIDE
ROND
TORQ
TRE3
ARKA
TELA
VEVE
FLUR
EMBD
LATO
LALO
TALO
MDIN